Advertisement
MC67
SETUP
Setting up and connecting the MC67 handheld devices to receive and deliver
requires several steps. These steps are setting the date and time, connecting
to a Wi-Fi network, and configuring the handheld with site credentials.
Setting up the Date and Time
1. From the home screen,
pull down from the top
to reveal the menu.
4. Uncheck both
'Automatic date & time'
and 'Automatic time
zone' which will allow
the setting of date and
time. Once these are
set, re-check the
previous check boxes.
2. The three bars at the
top is the menu icon.
Pressing this icon will
open the menu.
5. Press the 'Home'
button. Pull down the
screen from the top to
reveal the menu.
3. Scroll down and select
Date & Time.
6. Verify the settings were
saved by the date and
time displayed at the top
of the menu.
Advertisement
Table of Contents
Summary of Contents for quadient WTS MC67
- Page 1 MC67 SETUP Setting up and connecting the MC67 handheld devices to receive and deliver requires several steps. These steps are setting the date and time, connecting to a Wi-Fi network, and configuring the handheld with site credentials. Setting up the Date and Time 1.
- Page 2 Connecting to a Wi-Fi Network 1. From the home screen, 2. The three bars at the 3. Make sure Wi-Fi is turned pull down from the top top is the menu icon. on and press the word to reveal the menu. Pressing this icon will ‘Wi-Fi’.
- Page 3 Configuring the Handheld with Site Credentials 1. Locate the WTS(-P) app 2. Begin by pressing 3. Leave the settings to from the main screen or ‘Continue’ to register ‘Auto’. Enter the install the apps menu. the device. code and URL (leave as is unless otherwise instructed).
- Page 4 7. You are successful if 8. The MC67 is configured you see the ‘kite’ and ready for use. screen.
Need help?
Do you have a question about the WTS MC67 and is the answer not in the manual?
Questions and answers