Advertisement
OKIDATA C9000 • 9500 CARTRIDGE REMANUFACTURING INSTRUCTIONS
5. Using a small flathead screwdriver, push in the three tabs shown, along the bottom rear of the cartridge (left photo).
Push in two additional tabs along the top rear of the cartridge (right photo).
6. Remove the drum unit cover.
7. Remove the two screws from both sides of the doctor blade.
www.uninetimaging.com
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
