Sw Out Terminal - Fisher TLS-9960 Instruction Manual

OUTPUT TERMINALS

SW OUT Terminal

When recording, a pulse signal is output at the SW OUT
terminal.
This terminal is usually connected to the switch input (SW
IN) of devices like a camera switcher unit, or a quad
compressor.
SW OUT Terminal Output Setting
1
Press the MENU button until the (SET UP 4) menu is
displayed.
ø The FIELD (or FRAME) setting is flashing.
@@@@@@@@<SET@UP@4>
öSW@OUT
@@FIELD@@@@@@@@@01
@@TIMING@@@@@@@@FIELD
@@2H@@@@@@@@@@@@Y
öTHREAD@CHECK@@@Y
öVIDEO@LOSS@@@@@N
öREC@SPEED@@@@@@N
ö1@SHOT@SET
@@FIELD@@@@@@@@@1
@@INTERVAL@@@@@@1M
NOTE:
œ If "TIMING" is set to FRAME (see step
"FRAME" will be indicated instead of "FIELD".
2
Turn the SHUTTLE ring, to set the desired pulse
signal interval.
Available settings are:
4
),