Advertisement
H.
A.
G.
B.
J.
C.
KEY
D.
A. SafeSense
E.
B. Paper entry
F.
C. CD entry
D. Door
E. Basket - paper (inside)
I.
CAPABILITIES
Will shred: Paper, credit cards, CD/DVDs, staples and standard paper clips
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper,
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above
Paper/Card shred size:
Micro-Cut ...................................................... 5/64 inches x 15/32 inches (2mm x 12mm)
Cd shred size:
Strip-Cut .......................................................................................... 25/64 inches (10mm)
AdvANCEd PROdUCT FEATURES
Jam Proof System
Patented SafeSense
Eliminates frustrating jams
Technology
by preventing overloads
Stops shredder immediately
and powering through
when hands are too close to
misfed paper.
the paper entry.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands away from paper
entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
15
Reverse ( ) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
15
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder. Do
not place near or over heat source or water.
15
BASIC SHREddING OPERATION
PAPER/CARd OR Cd
1
2
3
AUTO
Feed paper/card
Plug in and put
Press ( ) ON to
straight into paper
disconnect power
activate
entry and release
switch in ON (I) position
www.fellowes.com features an extensive on-line support section with a number of self-service options
2
Technology
F. Basket - CD (inside)
J. Control Panel and LEDs
®
G. See safety instructions
1. Reverse
6. Remove paper
H. Disconnect power switch
2. ON/OFF
7. Sheet capacity indicator
I. Casters
3. Forward
8. SafeSense
4. Bin full
9. Auto button
5. Door open
Maximum:
Sheets per pass ........................................................................................................... 12*
CDs/Cards per pass ....................................................................................................... 1*
Paper entry width ........................................................................... 9 1/2 inches (240mm)
CD entry width ........................................................................... 5 13/64 inches (132mm)
* 8.5 inches x 11 inches, 20lb., (75g) paper at 120V, 60 Hz, 6Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Recommended daily usage rates: 4,000 sheets per
day; 200 credit cards; 10 CDs; 5 paper clips
Fellowes SafeSense
shredders are designed to be operated in home and office environments ranging
®
b etween 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
®
Sleep Mode
Energy saving feature
shuts down automatically
after 2 minutes of no
shredding activity
• This shredder has a Disconnect Power Switch (H) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Use only designated entry for shredding CDs
• Keep finger away from CD hole when shredding.
• Do not put foreign objects in paper entry.
• The grounded socket-outlet shall be installed near the equipment and shall be
easily accessible.
4
5
6
AUTO
Hold CD at edge,
When finished
Do nothing and
feed into CD
shredding set
or
shredder will go
entry and release
to OFF ( )
automatically to
sleep mode
ENGLISH
JAM PROOF SYSTEM OPERATION*
Model MS-470Ci
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
indicator (yellow)
®
*100% Jam Proof when used in accordance with user manual
SLEEP MOdE
WHEN IN SLEEP MOdE
1
MicroShred Technology
In sleep mode
MicroShred cut provides
maximum security by shredding
paper into over 2,513 particles
BASIC PROdUCT MAINTENANCE ANd TROUBLESHOOTING
per 8 1/2" x 11" mm sheet.
OILING SHREddER
All micro-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEdURE BELOW ANd REPEAT TWICE
1
AUTO
Turn off and unplug
shredder
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
PREvENTIvE MAINTENANCE ANd MISCELLANEOUS TROUBLESHOOTING
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds.
• Empty wastebasket when bin full indicator lights up.
• Shredder won't run if the door is open, or bin needs to be emptied. Bin must be in machine, with door closed, in order for machine to operate properly.
• Maintenance is an important part of protecting your investment. Don't forget our oil (35250) and shredder bags (36054).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
Advanced Jam Prevention- Electronically
1
2
measures paper thickness to prevent paper jams:
Up to RED: Too many
Remove several sheets until
sheets have been inserted.
indicator is below red.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
If a misfeed
All indicators light up and
Wait for flashing to stop after automatic correction
occurs:
shredder pauses for 3-6 seconds
is complete. Regular shredding will resume.
SAFESENSE
TECHNOLOGY OPERATION
®
SET-UP ANd TESTING
2
3
1
AUTO
AUTO
AUTO
AUTO
To get out of sleep mode
or
insert paper
Turn the shredder ON
touch control panel
( ) to activate SafeSense
®
CLEANING AUTO-START INFRAREd SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
2
3
1
AUTO
AUTO
*Apply oil across entry
Press and hold reverse
Turn off and unplug
( ) 2-3 seconds
shredder
15
3
Continue 100% Jam
Proof Shredding
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
2
3
4
AUTO
AUTO
Touch test area and
SafeSense
is active and
If hand is held on SafeSense
®
®
look for the SafeSense
working properly
area more than 2 seconds
®
indicator to illuminate
Shredder will shut off
.
2
3
4
AUTO
AUTO
Locate Auto-start
Dip cotton swab in
Using cotton swab, wipe
infared sensor
rubbing alcohol
away any contamination
from the paper sensors
3
Advertisement
