Cleaning And Mainenance; Disposal - UYAR iToast-1 Operation Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Cleaning and Maintenance
Cleaning instructions
Clean the machine every day.
Disconnect the unit from the power supply (pull the plug!) and allow it to cool
down before being cleaned.
Clean it only dry or with a damp cloth. Make sure that no moisture, oil or grease
will enter the unit.
After grilling remove the grilling residue with a wire brush (not included) while still
warm.
To clean the body, do not use metallic or sharp objects.
Clean the exterior body with a soft cloth and mild detergent.
Maintenance instructions
From time to time check the power cable for damage. Never use a machine when
the cable is damaged. If the cable is damaged, it must be replaced by customer
service or a qualified electrician to avoid danger.
In case of damage or malfunctions, contact your dealer.
Maintenance and repairs must be performed only by qualified personnel using
original spare parts and accessories. Never attempt to carry out repairs to the equip-
ment itself.

Disposal

At the end of its life your old unit is to be disposed of according to national regulations.
It is advisable to contact a specialist disposal company. To exclude an abuse and the
associated risks, please make sure that your old machine is unusable prior to disposal
and poses no danger to others.
EN
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Itoast-2Itoast-3Itoast-4Itoast-1 e/eItoast-1 e/gItoast-2 e/e ... Show all

Table of Contents