Driver/Passenger Swivels - Regency ULTRA Owner's Manual

VEHICLE OPERATION
DRIVER/PASSENGER SEAT CONTROLS
Your RV may be equipped with front seats that have
the capability to swivel and face the rear of the
coach. To operate the swivel functions, do the
following:
• Lift the slide release bar and slide the seat all
the way forward. It is essential that the seat
is moved forward to prevent damage to the
door panel and post when swiveling the seat.
• Move armrest into upright position.
• Pull the swivel lock level (located at beneath
the front of the seat) to the left and swivel
the seat slowly to the rear to prevent damage
to the door panel and post.
Swivel must be locked and in forward facing
position when vehicle is in motion.
Always open door slightly and swivel driver's
seat clockwise or swivel passenger's seat
counter-clockwise.
Lumbar Support
Turn the lumbar support knob clockwise or counter-
clockwise to suit your comfort needs.
Back Rest Adjustment
Turn the backrest adjustment knob clockwise or
counter-clockwise to adjust the tilt of the backrest.
Back Rest Tilt
Pull the backrest tilt lever upwards and hold to
release the position lock. Gently lean back to push
the back rest down. Lean forward to allow the back
rest to tilt upwards. Release the lever to engage the
lock and hold the back rest in position.
Seat Cushion Height Adjustment
Turn the seat cushion height adjustment knob
clockwise or counter-clockwise to adjust the height
of the seat cushion.
V e h i c l e O p e r a t i o n
REGENCY ULTRA MOTORHOME
NOTICE
| 26