Advertisement
Video Extender Rack Mount Kit VE-RMK2U
Installation Guide
The VE-RMK2U kit provides a mounting frame and accessories to install 12 ATEN Video Extenders in 2U of rack
space, and is compatible with ATEN VE800A, VE803, VE810, VE600A, VE602, VE560, and CE100.
Package Contents
Qty
Description
1
VE-RMK2U frame
12
2U mounting plates
26
plastic captive screws
36
countersunk head screws
Installation
1.
(A) Position the VE-RMK2U Frame on the front of the rack and align the holes in the mounting brackets with the
holes in the rack, then screw the mounting brackets to the rack. Rack screws are not provided. (B) Remove the
two screws to detach the center brace.
1
MISC00000277 09/2021 V2.0
Advertisement
Table of Contents
Summary of Contents for ATE VE-RMK2U
- Page 1 Installation (A) Position the VE-RMK2U Frame on the front of the rack and align the holes in the mounting brackets with the holes in the rack, then screw the mounting brackets to the rack. Rack screws are not provided. (B) Remove the...
- Page 2 Slide a 2U Mounting Plate with video extender attached onto a slot in the VE-RMK2U Frame, aligning the screw holes and fitting the notches. Secure the mounting plate to the frame with two Plastic Captive Screws. Repeat the process with each video extender you are installing.
Need help?
Do you have a question about the VE-RMK2U and is the answer not in the manual?
Questions and answers