Led Indicator; Cable Connections - Shure AONIC 40 Manual

Hardware reset
If the buttons do not respond to repeated presses, you can perform a hardware reset to force a power off.
1. Press the +, -, and power buttons simultaneously to immediately power off the headphones. This does not reset any
values you may have changed.
2. Power on the headphones.

LED indicator

Left
Pairing mode
Flashing blue and red
Pairing successful
Blue for 2 seconds
Pairing unsuccessful
Flashing blue
On a call
Red

Cable connections

The headphones can also use two different cables to access audio instead of using the wireless feature:
• USB-C:
◦ Charge the headphones
◦ Connect to digital audio
• 3.5 mm audio cable: Connect to an analog audio port
Right
Charging
Red
Low battery
Flashing red
Fully charged
Off
Shure Incorporated
7/20