How To Use An Easy Adjust Type Clasp - Seiko M-23 2R05 Instructions Manual

C
C Type
2
● How to wear or take off the watch
While pressing the push buttons on both sides
1
of the flap, pull the band out of the movable
loop and fixed loop. Then open the clasp.
Buckle
Push button
Fixed loop
Movable loop
Flap
33
EN
Pull the pin out of an adjustment hole of the
3
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
2 hole.
Pin
Adjustment hole
Adjustment hole
Pin
35
EN
Place the tip of the band into the movable loop
2
and fixed loop, and fasten the clasp by
pressing the frame of the buckle.
Fasten the flap.
4
● How to adjust the length of the band
While pressing the push buttons on both sides
1
of the flap, pull the band out of the movable
loop and fixed loop. Then open the clasp.
Buckle
Push button
Fixed loop
Movable loop
Flap

How to use an easy adjust type clasp

Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
* The band can be lengthened by up to about 5 mm.
This is useful if the band feels too tight or is uncomfortable for some reason.
Press the push buttons again to unfasten the
2
flap.
EN
EN
2
34
2
36