elero 24 180.0101 Manual

DoorControl Nr. 24 180.0101 / 24 180.0301
GB
Rolling door control for alternating current drives
180
130
It is important to observe these instructions in order to guarantee safety for persons!
Do not discard these instructions!
Incorrect assembly can cause serious injury.
Warning!
• Connections to the mains must be carried out by specialised personnel.
• The control must be disconnected from the mains during connestion work.
• The mains disconnection mechanism must be secured against unintentional and unauthorised
restarting and shoule always be accessible.
• Powered doors with pulsed or automatic operation must fulfil EN 12453.
• With external evaluation devices connect the 8.2 kOhm resistor in series with the switch contact.
• Caution: A moving door panel must not pose a risk of injury or damage.
• An 8.2 kOhm resistor can be connected in the CLOSED direction in the case of roller shutter drives.
• Caution: The roller shutters must not pose a risk of injury or damage.
Advice: Only tubular drives with mechanical limit switches can be connected.
Selector
switch
S 1
LED
S 2
Hold-open time
Proigramming
button
S 3
Integrated radio
receiver or slot for
radio receiver
Fuse
230 V Mains terminals
6,3 A tr.
24 V terminals
Operating appliances
GÜN T HER
GRUPPE