Modifications are all infringements. At any time, without notifying any parties, ARATEK has the right to make changes, additions, deletions, improvements and any other changes to the company's products and services. In the use of the company's products, ARATEK does not bear any responsibility or obligation;...
Cautions Any changes or modifications to your VC331 device not expressly approved in this document could void your warranty for this product and void your authority to operate this equipment. Although your Chameleon device is quite sturdy, it is a complex piece of equipment and can be broken.
Table of content NOTICE................................2 Important Statement............................3 General safety information:..........................4 Table of content...............................5 Product Introduction............................6 Product outlook............................7 SIM/TF Card Slot............................8 USB TYPE A / MICRO USB/ LAN Slot......................8 Earphone jack/ Volume/ Power........................9 Contact Card Reader..........................10 Barcode Reader............................11 Screen.................................12 Fingerprint Scanner............................13...
The high-quality FBI certified single-finger scanner (FAP20) and a series of other optional data capture modules ensure. It can be quickly identified and authenticated when needed. VC331 is suitable for a variety of application scenarios and can be used for voter registration and verification, border and access control.
One USB type A port is on the left Left Port panel cover, another USB type A port is on the right side of the device. MICRO USB This MICRO USB port is a specification that allows VC331 connected with PC and another host device. To do data transfer, such as firmware upgrade, file transfer and more. LAN Port...
Earphone jack/ Volume/ Power Ear phone jack Port Ear phone jack port is allowed user insert headphone sets while listen the instructions doing the voting process. Volume Button Volume button is allowed user to adjustment device volume from low to loud. Power Button Power Button is allowed user to turn on and shut done the device.
Contact Card Reader While user looking at this device in the low right-side is the IC Contact Card Reader. Always make sure that the smart chip on your card is facing you (visible to you) when you inserting to the slot. Always inert smart chip side first (as indicated with arrow direction).
Barcode Reader The barcode reader is a sub-miniature area image engine optimized for barcode reading. The engine captures digital images of a barcode for transmission to a decoder to decode a 1D or 2D barcode of any format supported by the decoding software. The scanner includes an LED illumination system.
Screen The VC331 display l with high brightness and high contrast is visible under strong sunlight or in outdoor environments. Avoid direct sunlight when possible to avoid overheating. Your tablet screen is tough and scratch resistant, but direct impact of sharp objects and abrasive materials could cause damage and leave marks.
Fingerprint Scanner The VC331 can accommodate a FAP20 optical fingerprint scanner. Each fingerprint scanner is FBI certified to ensures fast high quality image capture. Fingerprint Scanner The fingerprint sensor is software activated. Simply push down finger on the capture window. Do not use excessive force. Always keep he capture window clean.
Document Scanner The document reader reads and converts the information on the paper-printed election ballot into an electronic format, which is convenient for reading and storing the information. OMR scanner, front side to load the paper. OMR scanner, back side Noted: the election ballot receipt is 80mm thermal paper, OMR document reader can read all the content and barcode images.
Thermal Printer Thermal printing is a digital printing process which produces a printed image by selectively heating coated thermochromic paper, commonly known as thermal paper, when the paper passes over the thermal print head. The coating turns black in the areas where it is heated, producing an image.
The battery charging starts automatically. Charging port When using the VC331 device for the first time, do not connect any peripheral device except the supplied battery and Charger.
Battery Conditioning a new battery Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the Charger and fully charge the battery. 2. Turn on the device and complete setting up the operating system. 3.
Page 18
WARNING: Using an incompatible battery increases the risk of fire or explosion. Replace the battery only with a compatible battery purchased from the manufacturer. The battery is designed to work with your VC331 device. Do not use a battery from any other device.
Modifying the device’s operating system or installing software from unofficial sources may result in device malfunctions and data corruption or loss. These actions are violations of your VC331 license agreement and will void your warranty. Turn device ON ...
Cleaning device Turn off your device. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and from their electrical outlets. Use a soft microfiber cloth moistened with water or a non-alkaline detergent to wipe the exterior of the tablet. Do not allow water from the cloth to seep down to the tablet ports when doors are open.
○ Choose File transfer option ○ Open your PC, you can find VC331 is in your PC and you can transfer file between VC331 and your PC.. ○ After file transfer, unplug the Micro USB cable and disable the USB device mode.
Page 23
3. Why I can’t use Fingeprinrt after I transfer fills between device and PC? ● When you transfer files between the device and the PC, you need to enable the USB device mode. . ● After file transfer, you have to disable the USB device mode unless your fingerprint can’t work.. 4.
Page 24
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the VC331 and is the answer not in the manual?
Questions and answers