Before You Start - Royalcraft Berlin Assembly Instructions Manual

Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
Store all cushions indoors after use as they are not waterproof.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve the synthetic rattan, please use a protective cover
when your furniture is not in use. We would also recommend using
a gazebo or parasol over your furniture during the summer period
and prolonged sunny spells. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
Cushions should be cleaned following the care instruction on
the label.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd.
Armchair and Footstool for Berlin 6PCS Corner

Before you start

domestic use
only.
Lounging Sofa Set
Assembly Instructions
Don'ts
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
Never tilt the chair during use.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on the table.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fully tighten once you are
satisfied with the alignment of all
components.
Do not overtighten bolts.
www.royalcraft.co.uk
2 / 9