Heroshi Maruchi Instructions

Table of Contents

Download this manual

HEROSHI

Maruchi Chopper

INSTRUCTIONS

1. Assemble the main blade.

Assemble the dual blade by interlocking the two individual blade sections together.

Take the smaller (top) blade by the safety guard and slide down over the shaft of the main (bottom) blade.

Lift the unit by the shaft and carefully grip the safety area beneath the bottom blade. Grip the top blade by

its safety area. Keeping the bottom blade secure, rotate the top blade ¼ turn anti-clockwise to secure the

two blades. You will feel a 'click' when the two blades interlock successfully.

The dual blade is now assembled and ready to be used in your Heroshi bowls.

Note: There are black covers on the blades, these protect both the blades and your fingers. They will need to be

removed before using the unit. Be careful with the blades, they are sharp.

Table of Contents

Do you have a question about the Maruchi and is the answer not in the manual?

Marion Stevens

March 29, 2025

Can the bowls (not the blades), go on top shelf of dishwasher?

1 comments:

Mr. Anderson

March 30, 2025

The stainless bowl is dishwasher safe. The glass bowl should be washed in warm soapy water only and is not stated to be dishwasher safe.

This answer is automatically generated

Page 1 You will feel a ‘click’ when the two blades interlock successfully. The dual blade is now assembled and ready to be used in your Heroshi bowls. Note: There are black covers on the blades, these protect both the blades and your fingers. They will need to be...
Page 2 2. Attaching the blade to the bowl. The Heroshi Maruchi Chopper bowls (glass and stainless steel) have an internal shaft for the dual blades. To attach the dual blade simply slide over the top of the bowls shaft. The blade will be secured by the glass lid and the Maruchi Chopper.
Page 3 Note: If the Heroshi Maruchi Chopper does not feel like it is connecting to the shaft, do not force it, simply rotate the chopper slightly until you get the right alignment and the shaft slides in easily.
Page 4 5. Cleaning. Never immerse unit into water, use a moist cloth to wash. Carefully remove the blades by lifting them via the safety guard and give them a quick rinse. Disassemble the blades by carefully rotating the top blade in a clockwise direction, keeping the bottom blade firmly secured.