Operation; Keyboard Description; Starting Up; Basic Operation - JP Selecta VR 2000 Manual

Spectrophotometer
Table of Contents

Advertisement

Available languages

Available languages

MANUAL DE INSTRUCCIONES CODIGO 80247 REV A
Keyboard
J
.P. SELECTA s.a.
Marzo/2011

5 OPERATION

The control panel allows the equipment functions selection and informs about the
current operating status.

5.1 Keyboard description

[SET]
[GOTO]
[ZERO]
[PRINT]
[-]
[»] [«]

5.2 Starting up

Switch the spectrophotometer on by pressing the main switch. The equipment will start.
First of all, do the self-testing.
Note:
Do not open the sample compartment during the self-testing.
Then, the equipment will enter the waiting mode for 20 minutes to achieve the
working pattern.
To leave the waiting mode, press any key.
Note:
If you do not respect the waiting time, it is possible that a little drift will be shown
in the equipment readings.

5.3 Basic Operation

The display screen is user-friendly, always you can complete all the operation according
to the clues on the screen.
5.3.1
Set Wavelength
Press [GOTO] into wavelength setting screen. Then press [»] [«] to select the wa-
velength you want, and press OK to confirm. After the wavelength has been changed,
it returns to the main menu automatically (Fig. 2-1).
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 23
To program parameters
To establish the wavelength
To make blank, 100%T/0Abs
To print out results
«-» symbol that functions as indicated in the display
Cursors for selecting and scroll
Tel 34 93 770 08 77 Fax 34 93 770 23 62

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VR 2000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

4120026

Table of Contents