Advertisement
Safety – overheat protection
For your safety, this appliance is fitted with a thermal cut-out.
In the event that the product overheats, the cut-out switches
the heater off automatically.
To bring the heater back into operation, remove the cause of
the overheating, then unplug or turn off the electrical supply
to the heater for a few minutes.
When the heater has cooled sufficiently, re-connect and
switch on the heater.
Important Notes
Although this heater is manufactured to comply with the
relevant safety standards, certain types of carpets could
become discoloured by the temperatures under a portable
heater. If you are concerned about this, we recommend
that you contact the carpet manufacturer for guidance.
Alternatively, either stand the heater on a suitable base to
shield the carpet – call our Helpline for further advice.
You may notice some parts of the element appearing to
be hotter from time to time because of the variable airflow
through the heater. This does not cause a safety hazard.
The heat outlet grille may become discoloured with use – this
is caused by airborne pollution and is not a fault.
Recycling
For electrical products sold within the European
Community.
At the end of the electrical products useful life it
should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice in your country.
If you don't intend to keep the packaging of this product for
later use or storage, please dispose of it in an eco-friendly
way, please dispose of it in your recycling bin or nearest
recycling facility, thank you.
Cleaning
WARNING – ALWAYS DISCONNECT FROM THE
POWER SUPPLY BEFORE CLEANING THE HEATER.
Before commencing cleaning, switch off the heater and
allow it to cool. Disconnect the electricity supply to the
appliance.
The outside can be cleaned by wiping it over with a soft
damp cloth and then dried. Do not use abrasive cleaning
powders or furniture polish, as this can damage the
surface finish.
Advertisement
