Do you have a question about the 1941-P-1368 and is the answer not in the manual?
Questions and answers
Summary of Contents for Keeler 1941-P-1368
Page 1
LITHIUM DOUBLE CHARGER 1941-P-1368 LITHIUM MINI CHARGER 1941-P-1341 PLEASE READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY...
Page 2
Do not use unit if damaged and periodically visually inspect for signs of damage. Only Keeler Lithium handles i.e. with a red base can be used in the Keeler Lithium Charger. Do not try to insert a Keeler handle with a blue base into the Keeler Lithium Chargers.
Page 3
Li-ion batteries contain no toxic heavy metals, such as mercury, cadmium or lead. Keeler Handle & Bulb Identification Keeler handles & bulbs are colour coded to allow you to distinguish between a dry cell battery handle (2.8V) and a lithium handle (3.6v). The handles are colour coded as follows: Blue Base = 2.8v for dry cell batteries...
Page 4
Charging Replace the blanking plate with the appropriate mains plug adapter, or use IEC 60320 TYPE 7 connector (not supplied) See Fig 2. Fig. 2 Switch on your Lithium Charger by plugging it into a mains outlet. Place your handle in your Lithium charger as shown in Fig 3. Fig.
Page 5
No user serviceable parts - all preventative maintenance and servicing must only be performed by authorised Keeler representatives. Your Keeler Charger is guaranteed for 3 years and will be replaced or repaired free of charge subject to the following: 1. Any fault is due to faulty manufacture 2.
Page 6
Technical Information Input data see name plate: 120-240V - 50/60Hz Power Consumption: 2.5 Amps Charging Current: 1 Amp Operation: Continuous Classification: Class II equipment Type B Protection against electric shock Safety Class: Double insulated Ambient Temperature: C to +35 Transportation: C to +70 C 10% to 95% RH This equipment may be affected by electromagnetic interference.
Need help?
Do you have a question about the 1941-P-1368 and is the answer not in the manual?
Questions and answers