Advertisement
Quick Links
Quick start configuration guide for SARK and Sangoma Vega 50 BRI Gateway
Before You Begin:
The SARK PBX and Vega 50 appliance is connected to the network and all IP
•
addresses are configured as needed. If not then please consult links below for
SARK and Vega 50.
SARK PBX Quick Start Guide
Vega 50 Quick Start Guide
You are able to connect to the Web interface of both SARK PBX and Vega 50.
•
SARK PBX Configuration
Open a browser and enter IP address of Sark PBX. On prompt enter the following details.
SARK 200 / SARK 500
User Name : admin (lower case)
Password
: sarkadmin (lower case)
SARK 850/1000/1200
User Name : admin (lower case)
Password
: Aster2sk!
SARK 200 Mini PBX
Sangoma Vega Gateways
Advertisement
Related Manuals for SARK 200
Summary of Contents for SARK 200
- Page 1 SARK and Vega 50. SARK PBX Quick Start Guide Vega 50 Quick Start Guide You are able to connect to the Web interface of both SARK PBX and Vega 50. • SARK PBX Configuration Open a browser and enter IP address of Sark PBX. On prompt enter the following details.
- Page 2 Leave everything else as default and press save and then the commit button. Step 2 : Next step is to create an inbound route for calls coming from Vega gateway to Sark. This is where you define the numbers assigned to your by ISDN provider generally called MSN`s or DID/DNID.
- Page 3 To add a DID click on new object icon and select DID from Carrier drop down menu. Now enter a name for the incoming line e.g. If the incoming number is associated with Sales then call it sales etc. Enter the DID number provided to you by ISDN provider and press the save &...
- Page 4 Step 3: The next step is to create outbound route, for this go to Routing >> Route(outbound) this will take you to the following page. You can either change the default route below or create a new outbound route by clicking New.
- Page 5 Step 6: VoIP Next go to VoIP section and enter the IP address of SARK as SIP domain and SIP server IP/Name. Make sure registration mode is turn off and change codec 1 priory to G711Alaw64k or as shown in pictures below.
- Page 6 Step 7: Next go to BRI section, click on Handle Emergency calls check box if you want Vega to handle the emergency numbers calling. Enabling emergency calls feature will automatically create a dial plan on Vega 50 to pass all emergency calls over ISDN. Leave the telephone number list as “.*”...
- Page 7 Finally select the New Install ? Check box and press the Submit button. Wait couple of seconds and press the Reboot system button when it appears. Now you should be able to make/receive calls from and to Vega/SARK PBX.