1. Manuals
  2. Brands
  3. Erickson Manuals
  4. Lifting Systems
  5. 07464
  6. Manual

Erickson 07464 Manual

80” x 11” steel mesh loading ramp
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

WARNING:

To avoid personal injury and/or property damage, please read and
follow ALL of these instructions before assembling and operating.
1.
Never overload ramps. Maximum capacity for your ramp is 800 lbs per ramp; 1600
lbs per pair (all loads must be evenly distributed).
2.
Always use safety strap to securely fasten the ramp to the vehicle. This prevents the
ramp from slipping off of the tailgate.
3.
Carefully roll or winch equipment up or down the ramp. Never drive or ride your
equipment while loading or unloading.
4.
Make sure the ramp is aligned with the wheels of the equipment being loaded or
unloaded.
5.
Always load or unload on a solid, level and stable surface with the vehicle in park, the
parking/emergency brake on and the engine off.
6.
Use as loading ramp only.
7.
Ramp surfaces must be clean, dry and free from oil or grease or water.
8.
Maximum recommended height is 30 inches.
9.
Inspect ramp before each use. Tighten any loose hardware. Replace any worn or
damaged parts. Replace safety strap if webbing is frayed or worn. Do not attempt
to use a ramp that is damaged in any way. No modification, alteration or deviation to
the ramp are authorized by the manufacturer and shall not be made. Proper care and
maintenance of the ramp is essential to safety.
10. Proper use of this product is critical to safety and beyond the control of Erickson
Manufacturing Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for
any damage resulting from improper use. The liability of this product is limited to its
purchase price if it proves to be defective in material and/or workmanship. Warranty
information is available upon request.
English
/French/Spanish
80" x 11" STEEL MESH LOADING RAMP
Item No. 07464
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 07464 and is the answer not in the manual?

Questions and answers

Related Manuals for Erickson 07464

Summary of Contents for Erickson 07464

  • Page 1 Proper care and maintenance of the ramp is essential to safety. 10. Proper use of this product is critical to safety and beyond the control of Erickson Manufacturing Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for any damage resulting from improper use.
  • Page 2 Item No. 07464 SPECIFICATIONS 800 lbs. distributed load and Rated Capacity 1600 lbs when using 2 ramps Ramp dimensions 80” long x 11” wide (Unfolded) Ramp dimensions 40” x 11” x 4 ” (Folded) USAGE Step 1 Be sure you are loading on a hard, level and stable surface and that the vehicle you are loading onto is in “Park”...
  • Page 3 Repair/Replacement Warranty Erickson Manufacturing Ltd. warrants to the original purchaser that the mechanical com- ponents will be free of defects in material and workmanship for 1 year from the original date of purchase (90 days for commercial and industrial use). Transportation charges on product submitted for repair or replacement under this warranty are sole responsibility of the purchaser.
  • Page 4 Problems caused by parts that are not original Erickson Manufacturing Ltd. parts Limits of Implied Warranty and Consequential Damage Erickson Manufacturing Ltd. disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyone from using this product.

Table of Contents