Working With Memory; Storing Stations Into Memory; Labeling Memory Pages - Eton Grundig G5 Owner's Manual

7 WORKING WITH MEMORY

The G5 has 700 memories (also called presets), arranged in 100
pages, with each page holding 7 memories. Buttons F1-7 represent
memory locations.

STORING STATIONS INTO MEMORY

Note that when storing into an already occupied memory position, its
contents will be replaced with your new entry.
1. Turn on the G5.
2. Tune to the desired station.
3. Press the PAGE/TIME button (4) to place the G5 into MEMO mode.
4. To select the desired memory page (00-99) use the
hold down the STORE button (16) and use the tuning knob.
5. While holding down the STORE button (16), press one of buttons
F1-7, storing the station into that memory. Note that a box
appears around the selected memory location.
6. Release the STORE button.
7. To store another station, tune to the station and repeat steps 4-6
above.
8. When finished storing stations, press the PAGE/TIME button (4) to
exit MEMO mode.

LABELING MEMORY PAGES

Memory pages can be uniquely labeled with four, intermixed digits or
letters.
G5 OWNER'S MANUAL
buttons or
23