Advertisement
Operations
Stain Removal
Do Not Delay! Attending to an accident soon after
it occurs ensures an optimal clean. Leaving it for an
extended period of time may cause it to set and
become permanent.
1. Blot up liquids with an absorbent cloth or paper towels.
White materials are recommended because certain dyes
may bleed and make the stain worse.
2. Gently scrape up any semi-solids with a spoon or
spatula. Do not use a knife or other utensil with sharp
edges because it could damage the carpet or upholstery.
3. If the area has dried, remove loose dirt and
impediments.
4. Be sure to test any spot removal formulas in an
inconspicuous area first. This is important as some dyes
and materials could be damaged or discoloured by
cleaning solvents. If such a change should occur, try a
different solution or call a professional.
5. If cleaning on Berber carpeting, gently run your
machine over a hidden area. If no fuzzing occurs,
continue cleaning in soiled area.
6. Using the BISSELL® Pretreat formula, spray evenly
over soiled area. DO NOT OVERWET. Wait 3-5 minutes.
Gently work the solution by blotting area with a clean,
damp, colour-safe cloth.
7. Clean using the machine or the hose with attachment.
Machine Storage
Once your cleaning is complete, make sure both the Dirty
and Clean Water Tanks are emptied, rinsed out and dried
before the next use.
NOTE: Store cleaner in a protected, dry area. Since this
product uses water, it must not be stored where there
is a danger of freezing. Freezing will damage internal
components and void the guarantee.
Machine Care
For best results, a few simple steps can assure your
machine is well maintained after your cleaning is
complete.
1. Turn power OFF (0). Unplug the machine and wrap the
Power Cable.
2. After emptying the Clean and Dirty Water Tanks, rinse
them out with running water.
3. The top half of the Dirty Water Tank can also be rinsed
clean through the nozzle area.
4. To clean attachments, remove from hose and rinse
in clean, running water and let dry. Clean the hose by
removing it from the machine and let running tap water
run through both ends.
5. After carpet is dry, pick up loose impediments such as
hair and fuzz.
8
BISSELL.com
Advertisement
