User Manual 1. WELCOME 2. Overview 3. Where To Position 3.1 Small Meeting Room 3.2 Desk 4. How To Charge 4.1 USB Charging 4.2 Automatic Power Off 4.3 Battery Status 5. How To Connect 5.1 Connect To PC (Bluetooth) 5.2 Connect To PC (USB-C Cable) 5.3 Connect To Smartphone 6.
Page 4
7. Software 7.1 UC Manager 7.2 Update Firmware 8. Support 8.1 How To Care For Your CLEYVER Device...
1. WELCOME Thank you for using the CC90UC. We hope you will enjoy it ! CC90UC features Immersive sound for calls and music Intuitive plug and play connectivity - connect to laptop, smartphone and tablet via USB or Bluetooth Integrated Busylight...
2. Overview Bluetooth Mute/Voice assistant Battery Status Volume Down Volume Up Busylight Answer Call End Call Power On/Off USB-C Cable Table Stand USB Dongle (Optional)
3. Where to position 3.1 Small meeting room Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single CC90UC is ideal for up to 6 people. 2m/6ft...
3.2 Desk When using the CC90UC at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you.
4. How to charge 4.1 USB charging Plug the CC90UC into a USB-C power source using the attached USB-C cable. The CC90UC battery lasts for up to 15 hours of talk time and takes approx. 3 hours to be fully charged.
4.3 Battery status To view the current battery status, press the Battery status button. Then the LED light of the battery is on, When the battery is full, the LED is Green, when the battery is medium, the LED is Blue, When the battery is low, the LED is Red, When the battery is very low, the Red LED is flashing.
The bluetooth range is 30m. 30m/100ft For the CC90UC to work correctly you may need to set the USB Dongle as the audio device in your operating system’s audio settings. To manually pair the CC90UC with the USB Dongle, please use UC Manager.
5.2 Connect to PC (USB-C cable) Plug the CC90UC into a USB-C port on your PC. You may need to set the CC90UC as the playback device in your operating system’s audio settings. 5.3 Connect to smartphone Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone.
The Voice assistant button, and Mute button will only be visible under certain conditions (e.g. the Voice assistant button is only visible when the CC90UC is connected to smart phone and not on call).
6.2 Typical use WHAT Power on or off Hold (2 secs) the Power button Answer call Press the Answer call button End or reject call Press the End call button Press the Volume up or Volume down Volume up / down button Mute / unmute Press the Mute button...
6.3 The LED Light-Ring Status WHAT The LED light-ring flashes Green, Power on or off Blue and Red Incoming call The LED light-ring Green breathing On call The LED light-ring glow Red Mute The LED light-ring red breathing Low Battery The LED light-ring flashes Red...
6.4 Voice assistant button By default, the voice assistant button will activate your smartphone’s voice assistant (Siri ® Cortana , Xiaoai, Xiaoyi). When you press the voice assistant button, the button light will turn Green , and it will awaken the voice assistant.
Page 17
7.2 Update firmware Firmware updates improve performance or add new functionality to CLEYVER devices. 1. Connect the CC90UC to a PC using the USB cable. 2. Install UC Manager on your PC. 3. Use UC Manger to check for the latest firmware updates.
Page 18
8.1 How to care for your CLEYVER device The CC90UC is for indoor use only. Avoid storage at extreme temperatures (above 65°C/149°F or below -30°C/-22°F). Do not expose the CC90UC to rain or other liquids. Do not cover the CC90UC with stickers or labels.
Page 19
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 20
Designed and engineered in China Made in China MODEL: CC90UC...
Need help?
Do you have a question about the CC90UC and is the answer not in the manual?
Questions and answers