The Dryer is designed to utilize horizontal and vertical space effectively. By using the stacking kit (available separately,) this unit can be mounted onto the Equator combo Washer-Dryer. SN@ sˆ”™Œ”Š@ tˆ†‹”•’•Š Built-in moisture and weight sensing technology is designed to stop drying at the appropriate time.
Page 3
Equator Service at 1-800-776-3538 Model CL 837 V Clothes Dryer The model number of your dryer (CL 837 V) can also be found on the serial plate, located inside the door. The Dryer Stacking Kit and other Spare parts are available for purchase or special order.
INSTALLATION INSTRUCTIONS Exhaust Materials NOTE:To reduce the risk of fire, DO NOT use flexible plastic pipe to exhaust the dryer. The following exhaust materials are recommended and can be obtained from any local hardware store: 4.1 4"(Diameter) Rigid metal duct. 4.2 4"(Diameter) Non-combustable semi-rigid flexible metal duct.
CONTROL PANEL FEATURES PROGRAM CHART WALL INSERT OR RECESSED INSTALLATION 7.1 Warning! To reduce the risk of fire, this appliance must be exhausted outdoors. 7.2 Minimum clearances between the dryer cabinet and adjacent walls or other surfaces are: Sides Front & Rear 7.3 Make sure that the air inlets at the back are not blocked and do not allow fluff/lint to accumulate around the dryer A.
OPERATING INSTRUCTIONS • Open the door. • Load clothes loosely into the drum. • Load sheets first,starting with one corner. • Close the door. • Dry your hands. • Plug in the machine. • Select the final Dry Cycle (see program chart on control panel for recommendations).