Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21d
58395
58448
Advertisement
Table of Contents
Related Manuals for Badland 58395
Summary of Contents for Badland 58395
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 58395 Visit our website at: http://www.harborfreight.com 58448 Email our technical support at: productsupport@harborfreight.com...
-
Page 2: Important Safety Information
13. The jack must have a load of 150 lb or more to lower with the handle movement. At loads below 150 lb, the lifting mechanism will slide down the rail to the base. SAVE THESE INSTRUCTIONS. Page 2 For technical questions, please call 1-888-866-5797. Item 58395 58448... -
Page 3: Specifications
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 7. Components Figure A: Jack Layout Item 58395 58448 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Operation
9. Remove Jack from stabilized load. 5. Grasp the Handle and raise the Lifting Mechanism until the Large Runner is completely and securely under the load. Figure B: Lifting Steps 2 - 6 Page 4 For technical questions, please call 1-888-866-5797. Item 58395 58448... - Page 5 Jack. 4. Operate Jack as you would for raising a load. See Raising Stationary Load on page 4. Figure E: Winching Steps 1 - 4 Item 58395 58448 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Please Read The Following Carefully
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify item number when ordering: 48″ Trail Jack (58395): 193175438621 60″ Trail Jack (58448): 193175439239 Page 6 For technical questions, please call 1-888-866-5797. Item 58395 58448... -
Page 7: Parts List And Diagram
Cap Screw with Washer Climbing Pin Handle with Cotter Pin Climbing Pin Spring Handle Socket Small Runner Connecting Rod Pin Hex Bolt and Nut Connecting Rod Base with Cotter Pin Item 58395 58448 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.