Vehicle-Mount Antenna - Enterasys Outdoor Antenna Site Preparation And Installation Manual

Vehicle-Mount Antenna

Vehicle-Mount Antenna
The RoamAbout vehicle-mount antenna can be mounted on vehicles, such as fork-lift
trucks, that need continuous access to networked data whether inside or outside of the
building. The following table provides the specifications for the vehicle-mount antenna.
Table A-3: Vehicle-Mount Antenna Specifications
Mechanical
Connector Type (Access Point 2000)
•
FCC Countries
•
ETSI Countries: France, Japan,
Asia Pacific
Connector Type (RoamAbout R2)
•
FCC Countries
•
ETSI Countries: France, Japan,
Asia Pacific
Electrical
•
Frequency Range
•
VSWR (Voltage Standing Wave Ratio)
•
Nominal Impedance
•
Gain
•
Half-Power Beamwidth
•
Polarization
•
Power Handling
Antenna Environment
•
Operating Temperature
•
Relative Humidity Range
•
Wind/survival (mph)
•
Wind rating
•
Wind load
1
104 km/h (65 mph) with 1.25 cm (0.5 in.) ice.
A-4
Reverse Polarity-N (Male)
Standard-N (Female)
Standard-N (Female)
Standard-N (Female)
2400-2438 MHz
1.5:1
50 Ohms
5 dBi
NA
Vertical
100 Watts
- 40°C to +60°C (-40°F to 140°F)
0-100%
1
194 km/h (120 mph)
129 km/h (80 mph)
202 km/h (125 mph)