Holybro SiK Telemetry Radio V3 Quick Start Manual

Holybro SiK Telemetry Radio V3 Quick Start Manual

Advertisement

Quick Links

SKU17022,17023
SiK Telemetry Radio V3
Quick Start Guide

Overview

This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform
that typically allows ranges of better than 300m "out of the box" (the range can be extended
to several kilometres with the use of a patch antenna on the ground).
This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the
easiest ways to setup a telemetry connection between your Autopilot and a ground station.
It uses open source firmware which has been specially designed to work well with MAVLink
packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4
Autopilot.
The radios can be either 915Mhz or 433Mhz and you should purchase the model which is
appropriate for your country/region.
Note:
This radio does not support firmware upload via Mission Planner 1.3.75 or order. Please use
Mission Planner 1.3.75.1 or newer if firmware upload is needed.
www.holybro.com
P a g e
| 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SiK Telemetry Radio V3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Holybro SiK Telemetry Radio V3

  • Page 1 Quick Start Guide Overview This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground).
  • Page 2 ⚫ 28 x 53 x 10.7mm (without antenna) Electrical Data ⚫ Supply voltage: 5V DC (from USB or JST-GH) ⚫ Transmit current: 100 mA at 20dBm ⚫ Receive current: 25 mA ⚫ Serial interface: 3.3 V UART Product Description www.holybro.com P a g e...
  • Page 3 JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC) JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.) Holybro is a registered trademark of Holybro, registered in the U.S. and other countries. ©Copyright 2018 Holybro. All Rights Reserved. www.holybro.com...

This manual is also suitable for:

1701217012a17013170141701517022 ... Show all

Table of Contents