Table of Contents
Advertisement
Analog audio can be made from the USBird recording. First attach an audio tape
recording device to the sound card. Use the audio output of the sound card,
usually the green connector. At the PLAYBACK screen check the box labeled
ANALOG COPY. The Select screen appears. The select screen allows the
user to choose an audiotape length. After you choose the TAPE LENGTH the
audio will play. You should hit the record button on the audiotape device.
Refer to Figure 5-6 ANALOG COPY
Figure 5-6 ANALOG COPY
The AVI / WAV button converts the HAWK file to a standard AVI or WAV format
that can be played by any media player. The AVI button does not display the
video file once it has been converted. The AVI/WAV files are stored where the
HAWK_Temp folder is initialized in the UTILITY screen under SETUP DRIVES
and TEMP button. Refer to Figure 5-7 AVI/WAV Menu
Figure 5-7 AVI/WAV Menu
30
Advertisement
Table of Contents
