Stirling GS14R-LS Quick Start Manual

This quick start guide contains basic instructions to get you started. For the full picture, please refer to the
supplied manual with comprehensive usage instructions and important safety advice.
A

Filling the water tank

Grip the water tank firmly and pull
1
it out of the main unit. Turn the
water tank over and twist open the
tank cap.
2
Fill the water tank with water, then
close the tank and tighten the cap.
3 Replace the closed water tank into
its space on the main unit.

Water usage

• To extend the product life, we recommend using purified water: distilled, demineralised, or cold, boiled
water. Always add cold water to the tank, hot water will damage the tank and the inside of the appliance.
• Never fill the water tank with chemical substances, perfumes, vinegar, mineral water, starch, descaling
agents, ironing aids, cleaning agents or liquids other than water when using the garment steamer. These
products may cause damage to the appliance.
• Before filling and refilling with water, always remove the plug from the mains power socket. Never refill the
water tank while the appliance is connected to the electricity supply as there is a risk of electric shock.
IMPORTANT: Prime the pump before first use!
It is important that you prime the pump before using the garment steamer for the first time. This will ensure
steam is produced quickly when you need it. Please follow the instructions on page 13 in the manual.
Rotation support
Rotation button
Steam trigger
Steam self-lock button
Quick Start Guide
Let's get your new 2-in-1 steam iron
& garment steamer ready to use!

Adjusting the steam head

4
The steam head position of your new garment steamer can be
rotated 90 degrees so you can steam items in vertical (hanging)
Please refer to illustration (4) for the different buttons and to
With one hand, hold the steam head handle and press the
5
rotation button firmly until you hear the lock disengage. With
For horizontal ironing the steam head should be aligned
For vertical steaming the steam head should be rotated
1
position, or steam-iron them on your ironing board.
illustration (5) for the rotation sequence.
the other hand, grip the rotation support.
Turn over the page for usage
Model: GS14R-LS
2
with the handle.
90 degrees to the right.
instructions ...
3
B
4
5