Table of Contents
Advertisement
Quick Links
Following these mounting instructions with the hardware included will be more than
sufficient to support wall mounted installation.
Included Installation Hardware
x2
Tools You May Need
Screwdriver
screw
Level
Installation Instructions
Wall Mounted Toilet Paper Holder
wall
x2
anchor
Tape
Measure
allen
x1
wrench
Drill
1
Advertisement
Table of Contents
Summary of Contents for Nameek's Demetra Gedy 5125-13
- Page 1 Installation Instructions Wall Mounted Toilet Paper Holder Following these mounting instructions with the hardware included will be more than sufficient to support wall mounted installation. Included Installation Hardware wall allen screw anchor wrench Tools You May Need Drill Level Screwdriver Tape Measure...
- Page 2 1. Disassemble Put the included allen wrench into the two screws on the bottom of the body and turn clockwise to disassemble the base from the mounting piece. 2. Remove Bracket Pull mounting bracket from toilet paper holder. 3. Drill Anchor Holes Identify installation location.
- Page 3 5. Mount Bracket Mount bracket with screws. 6. Mount Paper Holder Install toilet paper holder over mounting bracket. 7. Tighten Screws Tighten two (2) screws with allen wrench included by turning counterclockwise.
Need help?
Do you have a question about the Demetra Gedy 5125-13 and is the answer not in the manual?
Questions and answers