Manual Usuario Smart v7”_v1 INDEX CE CERTIFICATION TECHNICAL CHARACTERISTICS GERERAL WARNINGS WARRANTY INSTRUCTIONS FOR INSTALATION & MAINTENANCE 5.1 Electric installation 5.2 Water connection 5.3 Components of the automatic washing system 5.4 Washing box 5.5 Washing system installation OPERATION OF THE WASHING SYSTEM...
Tipo de equipo / Type of equipment: KIT LAVADO HORNO/WASHING KIT Marca / Trade.: FM CALEFACCIÓN RXB 606, RXB 610, F 106, F 110 (SMART v7”) Modelo / Model no.: Nosotros, los abajo firmantes, declaramos bajo nuestra exclusiva responsabilidad que el...
Manual Usuario Smart v7”_v1 2. TECHNICAL CHARACTERISTICS 3. GERERAL WARNINGS Read this manual handbook before you start working with the device. Keep it for consultation, and if you need technical assistance, you must consult to your distributor. This manual must be delivered with the appliance. ...
Manual Usuario Smart v7”_v1 5. INSTRUCTIONS FOR INSTALATION & MAINTENANCE 5.1 Electric installation The electric installation must be done with an authorized technician, and compiling all the normatives. Ascertain that the electric red connection is match with the technical feature of the devices. 5.2 Water connection Is recommended, to use anti-lime system before to connect the water pipes to the device.
Manual Usuario Smart v7”_v1 5.4 Washing box Housing Detergent pump Rinse aid pump Electrical connection Washing water outlet Detergent aspiration Inlet Rinse aid aspiration Washing water outlet 5.5 Washing system installation 1. First unscrew the cap from the back of the oven. 2.
Page 7
Manual Usuario Smart v7”_v1 3. Secure the washing box using the screws provided. 4. Connect the water cables to the corresponding washing box entry. Inlet Inlet Water humidificator 4. Main water 5. Connect the output water cable of the washing box into the corresponding socket 5.a.
Manual Usuario Smart v7”_v1 7. Remove the cap from the oven cavity and screw the rotating arm on the roof of the oven. 6. OPERATION OF THE WASHING SYSTEM PROGRAMOZÁS: Service menü, "-19" kód, W17 menüpont, 0-ról átállítani 3-ra! Filling the detergent and rinse aid circuit The first time you install the automatic washing system, you should perform a washing test! Immerse both pipes “detergent as brightener”, into the cans.