Advertisement
Setting up your Pro Porch and Connector
Thanks for buying one of our Pro Porch and Connectors!! Here are some ideas
on using it.
1. Check that you have all of the necessary components.
Checklist:
1 x Heavy-duty Pro canvas awning
1 x Height adjustable vertical pole (170cm to 230cm)
1 x Long Pro guy ropes
1 x Horizontal pole
4 x Pegs
2 x Bolts
2. Lay out the canvas and attach the guy ropes to the awning securely. Fit the horizontal pole to the A frame of the
entrance to your Bell Tent. Attach the other end of the horizontal pole to the height adjustable pole.
3. Position the canvas awning over the frame using the eyelets to line it up right.
4. Secure both spikes with the bolts provided.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bell Tent Pro Porch and Connector
Summary of Contents for Bell Tent Pro Porch and Connector
- Page 1 Setting up your Pro Porch and Connector Thanks for buying one of our Pro Porch and Connectors!! Here are some ideas on using it. 1. Check that you have all of the necessary components. Checklist: 1 x Heavy-duty Pro canvas awning 1 x Height adjustable vertical pole (170cm to 230cm) 1 x Long Pro guy ropes 1 x Horizontal pole 4 x Pegs 2 x Bolts 2. Lay out the canvas and attach the guy ropes to the awning securely. Fit the horizontal pole to the A frame of the entrance to your Bell Tent. Attach the other end of the horizontal pole to the height adjustable pole. 3. Position the canvas awning over the frame using the eyelets to line it up right. 4. Secure both spikes with the bolts provided.
- Page 2 5. Pull the canvas outwards, securing the guy ropes around the outside edge using the pegs. Additional Pole set If you have chosen to purchase the set of two additional height adjustable poles, you are able to use them to create different shapes with your porch. We recommend experimenting to find the set up that suits you best. Available separately from https://belltent.co.uk/collections/awnings/products/pro-awning-pole-kit...
- Page 3 Connecting Bell Tents together 1. Before erecting the tents, ensure that the distance and positioning between both tents is correct. 2. Take the horizontal awning pole and line it up over both A frame spikes. 3. Place the canvas over the horizontal pole and secure the canvas to both spikes. 4. Pull out the canvas and secure all the guy ropes with the pegs. 5. NB This set up only works if one of your tents has two doors like the 6m Pro Twin Door but you can use it with single door tents if you use the Additional Pole Set to raise one side of the awing to create an entrance. Tips and Hints Despite being adjustable, you may find that the vertical pole is too long for a 3 Metre of 4 Metre Bell tent. This can be corrected by removing the rubber foot, and using a hacksaw to cut off the desired amount. For further tips and advice, give us a call on 07830 355 993. Don’t forget to share your photographs and experiences with us via our Facebook page or at info@belltent.co.uk.
Need help?
Do you have a question about the Pro Porch and Connector and is the answer not in the manual?
Questions and answers