Advertisement
2. Voltage: DC 5V
3. Stand by hours: 72 Hours
4. Talk time: 2-6 Hours
5. Charging time: 6 hours
6. Power consumption:
Static≤25MA
7. Peak power consumption: 0.25W/0.5W
8. Receive sensitivity: -106db
9. Antenna increment: All directions: 3.5db
This phone is a wireless communication device. So it is very important for you to install the phone in a proper place. To
place the antenna in a proper place is a very important for you to get a powerful signal.
1. Choose proper place for the antenna.
You can use your mobile phone to search for the place where the strongest signal is. Then put the antenna here.
Please do not make the antenna close to the phone. It will disturb the signal of the phone.
Please do not make the antenna and the phone too close to the TV set, computer, radiogram or any other wireless devices.
It will disturb the signal-receiving of the phone.
Please turn off the power in the lightning storm time.
2. Install the SIM/R-UIM Card
1). Screw off the screw of SIM/R-UIM card case, and open the cover.
2). Slide back the SIM/R-UIM card door and lift it up.
3). Slide the SIM/R-UIM card into the SIM/R-UIM door making sure that the clipped corner of the SIM/R-UIM
card lines up with the clipped corner of the SIM/R-UIM card holder.
4). Close the SIM/R-UIM card door and slide it to lock the SIM/R-UIM card in place.
5). Replace the cover of SIM/R-UIM card case and fixes it with a screw.
Notice:Before you install your SIM/R-UIM card into your wireless phone,make sure that the phone is in
power off status.Or your SIM/R-UIM will be damaged.
3. Install your wireless phone.
1). Please connect the antenna, insert the your SIM/R-UIM card, and install the handset.
2). Insert the power supply and turn the red button
phone. Then the backlight of the LCD will turn on.
Fixed Wireless Phone
emission≤500MA
Phone Installation
Certain/Selection: 12db
for 3 or 5 seconds or press the ON/OFF button at the back of
Advertisement
