Table of Contents
Advertisement
Quick Links
Fill the tank to 1 or 2 users'
line (for both water and ice)
Fit Recovery Pants around the
body using included Velcro
flaps
Quick User Guide
There are 3 flaps on each leg
and 2 flaps for hip
adjustments
Connect tubing from Aquilo
control unit to Recovery Pants
Plug Aquilo Control Unit into power
source using provided cable (do not
substitute power cable). Then press
Power (metal button). The Power
Button will turn blue
Advertisement
Table of Contents
Summary of Contents for Aquilosports Cryo-Compression Recovery Pants System
- Page 1 Fill the tank to 1 or 2 users’ line (for both water and ice) Fit Recovery Pants around the body using included Velcro flaps Quick User Guide There are 3 flaps on each leg and 2 flaps for hip adjustments Connect tubing from Aquilo control unit to Recovery Pants Plug Aquilo Control Unit into power...
- Page 2 Follow instructions to power on the water pump (on screen) Activate water pump by holding the ON button for 3 seconds Start water pump by pressing the ON button again A blue light (pump) starts blinking blue and indicates that the water pump is operating If the control unit is charged, no power source is required If the battery level is too low, the machine...
- Page 3 Optional Pulse feature will allow water pump to run for 2 minutes, off for 30 seconds, repeat Charging the Aquilo Control Unit Plug Aquilo Control Unit into power source using provided cable (do not substitute power cable). Then press Power (metal button).
- Page 4 After the duration of your session, wait 2-3 minutes before unplugging the connectors from the Recovery Pants. This will allow the water to drain from the pants back into the tank Drain tank after each session using provided drain hole/caps on either side of the tank. Some water remaining in tank is okay.
- Page 5 www.aquilosports.com...
Need help?
Do you have a question about the Cryo-Compression Recovery Pants System and is the answer not in the manual?
Questions and answers