Ac Operation - Emerson RP6251 Owner's Manual

AC Operation

The AC power cord is located inside the battery compartment. It is permanently
attached to the radio to prevent loss.
1.) Open the battery compartment by pressing on the "
and sliding it downward in the direction of the arrows.
2.) Remove the coiled AC cord form the storage compartment and extend it to its
full length.
3.) Position the cover over the battery compartment and place the cord into the
notch on back cabinet as shown.
4.) Slide the battery cover upward until it snaps back into place.
Connect the AC cord to your 120V 60Hz AC outlet.
RP6250_011807.p65
(Notch on Back Cabinet)
5
5
" marks on the cover
18/1/2007, 10:58