Advertisement
Quick Links
Advertisement
Related Manuals for Digital Touch Systems Drafting Table
Summary of Contents for Digital Touch Systems Drafting Table
- Page 1 Touch Screen Kiosk Assembly instructions DRAFTING TABLE...
- Page 2 Parts: Screen Pencil tray Keyboard Tray (Optional - not all drafting tables will come with this part) Drafting Table - Assembly Instructions DigitalTouch Systems...
-
Page 3: Hardware Included
Hardware Included: M6x12 Panhead Machine Screw x2 M6x30 Panhead Machine Screw x4 Tools needed: #2 Philips Head Screwdriver... - Page 4 Step 1 The drafting table will ship fully assembled with the exception of the monitor, PC, and pencil tray. The first step will be to mount the Screen to the table by using the M6 screws provided. Make sure the table is in a flat position.
- Page 5 Next, plug in the table and raise the tilt to access the other two screws either on the top or bottom of the Screen, depending on which size you have (please refer back to Step 1 regarding the different sizes). Screen Keyboard Tray Drafting Table - Assembly Instructions DigitalTouch Systems...
- Page 6 The screws for this (M6x12) should be screwed into the outer edge of the Screen chassis. Remove the screws and mount the Pencil tray to this edge as shown below. Screen Pencil tray Drafting Table - Assembly Instructions DigitalTouch Systems...
- Page 7 The four screw holes shown on the right side of the screen align with the VESA pattern for mounting the PC. Please refer to the picture below of the drafting table. These holes on the table can be used for cable management once the PC is mounted to the screen.
- Page 8 PC when cable managing. The power supply can be secured to the area using VHB, velcro or some sort of heavy duty, double- sided adhesive tape. Drafting Table - Assembly Instructions DigitalTouch Systems...
-
Page 9: Troubleshooting
4‐6” away from the switch. If still no result ensure there is power running to the power supply which if powered will have a green LED light illuminated on the brick. Drafting Table - Assembly Instructions DigitalTouch Systems... - Page 10 1(512) 600-0461 support@digitaltouchsystems.com digitaltouchsystems.com...
Need help?
Do you have a question about the Drafting Table and is the answer not in the manual?
Questions and answers