Twoey Outside 2250 Assembly Instructions Manual

2250
OUTDOOR GARAGE
"Leave Me Outdoors Range"
Assembly Instructions
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.

Additional Tools Required

Maintenance.

Some residual dust from the manufacturing process may be apparent
This will wipe off with a damp cloth.
Make sure any drain holes are kept clear.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.

Weathering Effects.

Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause rot within
the material. Should staining occur it is suggested that the surface be
cleaned with a mild detergent
Fading may occur if left in direct sunlight for prolonged periods of
time.
THIS PRODUCT WILL NOT PROTECT ANY ITEMS STORED
WITHIN FROM THE WEATHER.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
2250 - Outdoor Garage CS0690
Adults Required For Assembly
.
Manufactured by:
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Cumbria CA7 8EW
31/08/2018
.