Download Print this page

Mood Media Aaron's Harmony Installation Manual

Advertisement

Quick Links

MOOD+AARON'S
MOOD HARMONY
MUSIC INSTALLATION
Welcome to Mood Media.
This document contains the step-by-step instructions you will need to connect Mood's Harmony
Music Player to your Aaron's DJ System.
The complete installation should take no more than 30 minutes.
STEP 1
+
The Harmony Music Player comes in a brown box with a lable
saying Audio.
+
Open the box & unpack all contents
STEP 2
+
Take a moment to check you have all the necessary parts.
1.
2.
4.
3.
5.
Included &
Required
1. Harmony Player
2. A/C Power Adapter
3. RCA Cables
4. Remote Control
5. Batteries x 2
STEP 3
+
Familiarize yourself with the media player.
Front
Showing your 3 status lights
(green when online)
1.
2.
Included but
NOT Required
1. HDMI Cable
2. Data Cable (cat5)
Back
This is where you will connect
your RCA cable and power
adapter
GUIDE
STEP 4
+
Bring all required parts to the Aaron's DJ System
STEP 5
+
Locate the AUX Audio Input on the back of the DJ System
A
This is where your RCA cables
will be attached
STEP 6
+
Connect the RCA Cables to the AUX Audio Input
A
The yellow connection is not
required
B
IMPORNTANT: DO NOT connect
the cables to the LINE OUT AUDIO
OUTPUT. They must be connected
to the AUX AUDIO INPUT
B
Connect white-to-white and
red-to-red

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aaron's Harmony and is the answer not in the manual?

Questions and answers

Summary of Contents for Mood Media Aaron's Harmony

  • Page 1 MOOD HARMONY ™ MUSIC INSTALLATION GUIDE Welcome to Mood Media. This document contains the step-by-step instructions you will need to connect Mood’s Harmony Music Player to your Aaron’s DJ System. The complete installation should take no more than 30 minutes.
  • Page 2 STEP 7 STEP 11 Connect the RCA Cable to the AV input on the Harmony Music Device Turn up the volume on the DJ System STEP 8 1. Increase to the appropriate volume for your store Plug in the power cable to the outlet and connect it to the power input on the Harmony Music Device STEP 12 Use the Velcro to mount the Harmony Device to the back of the DJ...