Provision ISR PR-HDoNet + User Manual

HDMI Extender over Cat5e/Cat6

I. Introduction

This HDMI Extender allows you to extend your HDMI signal over
standard Network cable.
While HDMI cables are expensive, inconvenient to wire and suffer
from very limited transmission distances – Ethernet cables offers a
wonderful alternative.
PR-HDoNet+ enables you to extend HDMI signal to remote display
unit to a maximum of 60 meters over Ethernet cable while
maintaining your remote controller active (from the display unit
location).

II. Features:

1. Transmits HDMI signal up to 40m distance over single Cat5e and
up to 60m over single cat6 cable
2. HDMI 1.3 & 3D Support
3. 12Bit deep color and bandwidth of up to 225 MHz support
4. Support video resolution up to 1080P@60Hz
5. Support audio format: DTS-HD / Dolby- true HD / LPCM7.1 /
DTS / Dolby-AC3 / DSD
6. DC5Vpower supply is included
Note: Distance may be affected by the cable quality, length
and other environmental interferences.

III. Product interface pictures

Transmitter(Tx)
Port name
HDMI IN/OUT
UTP
RST
EDID
DC/5V
LED indicator
PWR
STA
www.provision-isr.com
PR-HDoNet + USER MANUAL
Receiver(Rx)
Description
HDMI signal input/output
RJ45 port;
According to the connected cable length to make adjustment
of RST (If you change your display unit and/or cable length,
you must use it)
EDID Copy button, Press 3 seconds to copy display
configuration from the transmitter. If there is no display after
connection to display connect, restore default by RST.
Power adapter socket
Description
System power indicator
HDMI signal indicator