Table of Contents
Summary of Contents for SportsArt Fitness ANT Plus
- Page 1 ANT+ Display assembly manual Note For C510 Install the Display Assemble the display (1), water-resistant membrane (2), and display bracket (3) in the order shown below. Note: In installing the water-resistant membrane, put the rough side up.
- Page 2 ANT+ Display assembly manual Note For C510 Display Placement Please secure the display to the handlebars as shown below. First, center the display. Then secure it with screws. If needed, add rubber strips (4) to narrow the gap between the handlebar and the clamp before securing the bracket.
- Page 3 ANT+ Display assembly manual Note For C510 Transmitter Placement Use zip ties to loosely secure the transmitter onto one fork of the bike. Align the transmitter with the magnet on the flywheel. Press the button on the transmitter. An LED will light briefly then extinguish. With your hand, rotate the flywheel.
Need help?
Do you have a question about the ANT Plus and is the answer not in the manual?
Questions and answers