Subscribe to Our Youtube Channel
Related Manuals for HME JTECH Staffcall IQ Paging
Summary of Contents for HME JTECH Staffcall IQ Paging
- Page 1 User Manual Date: 11.05.18 Staffcall IQ® Paging 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGCP-1...
- Page 2 User Manual Staffcall IQ Pagers Model Number: STFIQ Components ® Your StaffCall paging system is comprised of three key elements: The JTECH Desktop Transmitter Applies to models: ISTATION The Staffcall IQ Pagers The Staffcall IQ Charger Quick Setup ...
- Page 3 User Manual Staffcall IQ Pagers Model Number: STFIQ System Configurations System Default Configuration The paging system was set to default settings listed below prior to shipment. Current time is set. Out of Range is set to OFF To enter programming mode, on the transmitter, press “SETUP”, use password “1379” and press “ENTER”. Use the “*/MENU”...
- Page 4 User Manual Staffcall IQ Pagers Model Number: STFIQ 2. Press the “ENTER” key to save the programming. 3. Press the “CANCEL” key to exit the system programming menu. Set Out of Range With this feature enabled, the pagers will play a melody or voice when taken out of range of the transmitter to inform the guest that they are too far away and will miss their page.
- Page 5 Make sure your company information is on all correspondence including the outside of the shipping box. Ship in a traceable manner. Insure the package. JTECH is not responsible for packages lost in transit. Please save the tracking number. Shipping address: JTECH, an HME Company 1400 Northbrook Parkway #320 Suwanee, GA 30024 ATTN: Repairs 800.321.6221...
- Page 6 Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements...
- Page 7 User Manual Staffcall IQ Pagers Model Number: STFIQ Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Need help?
Do you have a question about the JTECH Staffcall IQ Paging and is the answer not in the manual?
Questions and answers