Outwell EPSILON Instruction Manual

EPSILON BULB
MODEL: 650885 / LB - 001
5. USB SOCKET
3. HANGER
4. USB PLUG
1. LENS
2. LAMP BODY
UK: INSTRUCTION MANUAL
Light modes:
• Connect the USB plug (4.) to a 5V USB
power outlet, and the lamp will light
• If used together with the Epsilon Bulb
Set, the control button on the set will
turn on/off and dim the light.
Use of the lamp:
• Lamp is powered by 5V DC.
• Lamp can be powered by any 5V USB
output.
• Lamps can be chained, by connecting
additional lamps to the USB socket (5.)
on the lamp body (2.)
• Hang lamp from the hanging point
• Lamp can be cleaned
with a damp rag
• Do not use corrosive
liquids to clean the lamp
• Do not stare into the light source
Light source: LED
"This product contains
a light source of energy
efficiency class G.
Light source and control
gear are not replaceable. This would
introduce weak points in the construc-
tion, that could reduce the lifetime
of the product.
Instruction for removal of light source
and control gear by market surveil-
lance authorities:
1) Remove lamp lens (1.) by hand. A
twisting motion will help.
2) Pry out PCB with LEDs with a pick
3) Cut needed wires to remove the
required components for testing
Instruction for disassembly of
lamp for disposal of compo-
nents when lamp has reached
the end of its usable life:
- See steps 1-2 above
4) Cut wires and pry out LEDs on circuit
board with a pick. Dispose of
electronics according to local
regulations
5) Dispose of remaining components
according to local regulations
Technical data (lamp):
5V , 5W
Class 3 appliance
INNOVATIVE FAMILY CAMPING