Picture Screen Adjustment - Eiki LC-SX4LA Owner's Instruction Manual

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display desirable image size.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
2 Press POINT DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
Normal
Provides image to fit original resolution size (1280 x 1024).
True
Provides image in its original resolution. When original image
resolution is larger than original resolution (1280 x 1024), this
projector enters "Digital zoom +" mode automatically and the image
is compressed.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when input
image resolution is larger than panel resolution (1280 x 1024).
A projected image can be also expanded by pressing D.ZOOM L
button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM M
button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
L/M, SELECT, POINT and AUTO PC ADJ. buttons.
COMPUTER INPUT
SCREEN MENU
Move a red frame to function and press
SELECT button.
NOTE
G True and Digital zoom +/– cannot be operated
when "RGB", "1035i (HDTV)", "1080i50 (HDTV)" or
"1080i60 (HDTV)" is selected on PC SYSTEM
Menu (P26).
G Wide cannot be selected when "720p (HDTV)",
"1035i (HDTV)", "1080i50 (HDTV)" or "1080i60
(HDTV)" is selected on PC SYSTEM Menu (P26).
G This projector cannot display any resolution higher
than 1600 X 1200. If your computer's screen
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
G Input image data in other than SXGA (1280 x
1024) is modified to fit original resolution size
(1280 x 1024) in initial mode.
G Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
SCREEN Menu icon
33