Cameo H1 Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS
H1 WALL MOUNT
WALL MOUNTING KIT FOR H1 SERIES

PRODUCT INFORMATION

This item is a product-specific accessory intended exclusively for use
with Cameo H1 series spotlights.
These installation instructions do not replace the user manual of the
associated product. Always read the relevant user manual first.
This accessory has no influence on the intended use of the associat-
ed product.
Observe the safety instructions in the user manual of the associated
product!
The technical data given in the user manual may change in connec-
tion with this accessory.

SAFETY INSTRUCTIONS

1. Please read this manual carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Use the accessory in the prescribed manner only.
HAZARD: KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT
CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS
PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS
MUST BE KEPT OUT OF THE REACH OF CHILDREN!
E
D
Cameo ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
INCLUDED
Remove the product from the packaging and remove all packaging
material.
Please check the completeness and integrity of the delivery and
notify your distribution partner immediately after purchase if the
delivery is not complete or if it is damaged.
Product includes:
A. 1 x wall mounting plate
B. 1 x connecting element
C. 4 x fixing screw M4 x 18 plus washers
D. 1 x locking screw M4 x 18 plus washer
E. 1 x cover cap
F. 2 x long covering rail
Installation instructions
B A
A-1
C
A-1
F