Before Operation; Top Controls And Indicators - Eiki LC SX4L LC-SX4L LC-SX4L Owner's Instruction Manual

BEFORE OPERATION

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
TOP CONTROL AND
INDICATORS
FOCUS BUTTONS
Used to adjust focus.
(P22)
ZOOM BUTTONS
Used to adjust zoom.
(P22)
AUTO PC ADJ. BUTTON
Use to operate AUTO
PC Adjustment function.
(P28)
IMAGE BUTTON
Used to select image
level. (P31, 36)
LENS SHIFT BUTTON
Used to select LENS SHIFT
function. (P22)
16

TOP CONTROLS AND INDICATORS

VOLUME BUTTONS
Used to adjust volume.
(P24)
FOCUS VOLUME INPUT
ZOOM
LENS
AUTO
MENU
SHIFT
PC ADJ. IMAGE
MENU BUTTON
Used to open or close
MENU operation. (P19,
20)
INPUT BUTTONS
Used to select input
source. (P25)
ON ON -- -- OFF OFF
SELECT
LAMP WARNING
REPLACE TEMP. READY
SELECT BUTTON
Used to execute item
selected. It is also used
to expand / compress
image in
ZOOM mode. (P33)
POINT LEFT/RIGHT/UP/DOWN BUTTONS
Used to select an item or adjust value in
ON-SCREEN MENU. They are also
used to pan image in DIGITAL ZOOM
mode. (P33)
+/–
POINT UP/DOWN buttons are also used
as adjust Lens Shift. (P22)
POWER ON–OFF BUTTON
Used to turn a projector
on or off. (P21)
LAMP REPLACE INDICATOR
Turns to yellow when
life of a projection lamp
draws to an end. (P44,
45)
WARNING TEMP. INDICATOR
Flashes red
internal projector
temperature is too
high. (P42)
READY INDICATOR
Lights green when a
projector is ready to be
LAMP
turned on.
flashes green in Power
Management mode.
(P40)
LAMP INDICATOR
Becomes dim when a
projector is turned on.
And bright when a
projector is in stand-by
DIGITAL
mode.
when
And it