Summary of Contents for Inter-m RME-6108
- Page 1 Operation Manual Remote MIC Extender RME-6108 * Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean) do not have handles installed due to customer preference.
- Page 2 A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
-
Page 3: Table Of Contents
Front Panel ............................5 Rear Panel ............................6 Applications ............................7 Block Diagram ..........................8 Specifications ..........................9 Service ............................10 Procedures............................10 Schematic .............................10 Parts List ............................10 Warranty ............................10 "We, Inter-M to apply the appropriate set of E4 & Class A for Electromagnetic Environment Condition." RME-6108... -
Page 4: Unpacking
REMOTE MIC EXTENDER Unpacking Unpacking Although your RME-6108 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. -
Page 5: Features
Features - REMOTE MIC EXTENSION When three (3) or more remote mics (RM-6024) are needed, an RME-6108 can connect up to eight (8) additional remote mics (RM-6024). Two RME-6108 can be linked to enable a maximum of sixteen (16) remote mics (RM-6024). -
Page 6: Equipment Setting And Checking
3. Number selection of RM-6024 is based on which ECS-6216 connecting terminal is used (RM1~ RM2) as shown below: 1) When an RME-6108 is connected to RM1 terminal, remote mics (RM-6024) No.1~ No.8 are numbered as follows: RME Input Terminal RM Equipment Number 2) When an RME-6108 is connected to RM2 terminal, remote mics (RM-6024) No.9~ No.16 are numbered... -
Page 7: Front Panel
- If RM is connected normally, it will be on and flicker in TALK mode. - If it is not connected or it has a problem in communication, it will be OFF. 2. STAND-BY LED - Solid green indicates “ready to use”; blinking green indicates communication problem. RME-6108... -
Page 8: Rear Panel
RS-422 Data - TX+ Balanced Audio Output - HOT Balanced Audio Output - COLD 3. DC INPUT TERMINAL - Power input terminal. Check polarity before connecting DC 24V. - When connecting to PD (Power Distributor), connect to unswitched terminal. RME-6108... -
Page 9: Applications
DC 24V, 900mA 제조자명 : 1 2 3 4 5 6 7 8 9 10 고객지원팀 TEL : 1588 7074 ADDRESS SETTING: 1~8 RME-6108 만일 기재에 이상이 있을 경우 감전 또는화재의 위험이 있으니 RM-6024/6012KP 캐비넷을 열거나 내부를 만지지 마십시오. OUTPUT INPUT... -
Page 10: Block Diagram
REMOTE MIC EXTENDER Block Diagram Block Diagram RME-6108... -
Page 11: Specifications
REMOTE MIC EXTENDER Specifications Specifications RME-6108 Channel Communications Protocol RS-422 (Maximum 1km/3,280 feet) Operating Temperature -10°C ~ +40°C/14°F ~ 104°F Power Source DC 24V Weight (Set) 2.8kg/6.17lbs Dimensions (Set) 482(W)x44(H)x280(D)mm/19(W)x1.7(H)x11(D)in Specifications and design are subject to change without notice. DIMENSIONS... -
Page 12: Service
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region. - Page 13 NOTE RME-6108...
- Page 14 NOTE RME-6108...
- Page 15 REMOTE MIC EXTENDER RME-6108...
- Page 16 Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).