Download Print this page

Advertisement

Quick Links

For a step-by-step installation video, please visit:
loopphonebooths.com/assembly-instructions

Advertisement

loading

Summary of Contents for LOOP CUBE

  • Page 1 For a step-by-step installation video, please visit: loopphonebooths.com/assembly-instructions...
  • Page 2 Central section of Loop Cube. Using a drill and a #2 robertson bit then remove cross members and the one side marked “removeable”. Loop is designed and manufactured by ONETWOSIX Design Inc. | 12914 146 St NW Edmonton, Alberta, Canada T5L 2H7 | www. o netwosix. d esign...
  • Page 3 Remove bolts on outside holding section to the crate crates until doors are removed and installed. Loop is designed and manufactured by ONETWOSIX Design Inc. | 12914 146 St NW Edmonton, Alberta, Canada T5L 2H7 | www. o netwosix. d esign...
  • Page 4 *One person must the required bolts hold the side upright as the other connects the wiring. Loop is designed and manufactured by ONETWOSIX Design Inc. | 12914 146 St NW Edmonton, Alberta, Canada T5L 2H7 | www. o netwosix. d esign...
  • Page 5 *One person must remain holding the side in place until the upper connection bolts Hinges are secured. Loop is designed and manufactured by ONETWOSIX Design Inc. | 12914 146 St NW Edmonton, Alberta, Canada T5L 2H7 | www. o netwosix. d esign...
  • Page 6 Plug phone booth into wall outlet with included Clockwise = Stonger hold power cord. Enjoy! Counter-clockwise = Weaker hold Loop is designed and manufactured by ONETWOSIX Design Inc. | 12914 146 St NW Edmonton, Alberta, Canada T5L 2H7 | www. o netwosix. d esign...
  • Page 7: Important Safety Instructions

    • Do not operate where aerosol (spray) products are being used or where oxygen is being administered. Loop Cube must be installed as per local codes and jurisdictions. Loop and ONETWOSIX cannot be held liable • To disconnect, remove plug from outlet.
  • Page 8: User Maintenance Instructions

    User Maintenance Instructions EXTERIOR & INTERIOR • If exterior is wood, dust regularly with a slightly damp blotting firmly with clean, dry paper towels until the area is soft lint-free cloth. Wipe dry with a dry soft cloth in nearly dry. There are many solvent-based spot removers the direction of the wood grain.
  • Page 9 UPHOLSTERY (material specific) For tougher oil-based stains, confirm the construction of your textile is bleach cleanable. If so, and additional • If upholstery is cloth clean with water-based cleanser or stain treatment is needed, use a 10% solution of diluted mild, water-free dry cleaning solvent.
  • Page 10 12914 146 St. NW Edmonton, Alberta, Canada T5L 2H7 www.loopphonebooths.com | info@loopphonebooths.com...