Summary of Contents for Lyngdorf Audio BW-20
- Page 1 LYNGDORF LS-1000 INSTALLATION MANUAL (working document) LYNGDORF AUDIO BW-20 INSTALLATION LS-1000 LS-1000 Center MANUAL [Skriv tekst]...
-
Page 2: Table Of Contents
TABLE OF CONTENTS COMPLIANCE ..................... 3 PRE-INSTALLATION ................... 4 INSTALLATION ....................7 BW-20 MOUNTING DIMENSIONS ..............8 TECHNICAL SPECIFICATIONS ................9 SERVICE INFORMATION ................. 10 Lyngdorf Audio BW-20 – Installation manual... -
Page 3: Compliance
Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Lyngdorf Audio BW-20 – Installation manual... -
Page 4: Pre-Installation
PRE-INSTALLATION Unpacking the BW-20 Carefully remove the BW-20 from the carton and check for shipping damage. Contact both the shipper and your local Lyngdorf Audio representative immediately if the unit bears any sign of damage from mishandling. In some cases, it may be necessary to return the equipment to Lyngdorf Audio or an authorized service provider for repair;... - Page 5 The best placement is inside a wall cavity with the BW-20 woofers front-firing, in-line with the in-wall speakers. If the BW-20 is placed in the room, the best placement is with the woofers back-firing, facing the boundary.
- Page 6 Required space for the BW-20 in the room If the BW-20 is placed back-firing to a wall, leave a minimum of 50 mm / 2 inch to the wall to allow for the woofer excursion and soundwaves to emit. If the BW-20 is placed front-firing into the room, place it as close as possible to the wall. Leave a minimum of 10 mm / 0.4 inch space to the wall so the BW-20 is not making contact, in order to avoid mechanical...
-
Page 7: Installation
Plug-in and turn the speakON connector back to the BW-20 speakON connector port. Place the BW-20 Bring the BW-20 to its upright position in the selected location. Once upright, adjust the four spike feet to level the BW-20 and achieve optimal stability. Using the feet of the BW-20 You can either use the attached black floor protectors over the spikes to prevent scratches on the floor, or use the spike tips to make a firm, almost fixed contact to the ground. -
Page 8: Bw-20 Mounting Dimensions
BW-20 MOUNTING DIMENSIONS 734 mm / 29” 300 mm / 11.8” 450 mm / 17.7” Mounting dimensions including spike feet and required woofer excursion. Lyngdorf Audio BW-20 – Installation manual... -
Page 9: Technical Specifications
Dimensions (W x H x D): 450 x 710 x 270 mm / 17.7 x 28 x 10.6 inch (Cabinet without spike feet and woofer excursion) Weight: 35kg / 77 lb Finish: Matte black Lyngdorf Audio BW-20 – Installation manual... -
Page 10: Service Information
If return is made in authorized packaging, risks are borne by Steinway Lyngdorf. Additional charges may occur if new packing materials are required for return shipment. Please check the latest version of this printed manual on our website: www.steinwaylyngdorf.com Lyngdorf Audio BW-20 – Installation manual... - Page 11 Lyngdorf Audio BW-20 – Installation manual SL AUDIO A/S • ULVEVEJ 28 • 7800 SKIVE • DENMARK • WWW.STEINWAYLYNGDORF.COM...
Need help?
Do you have a question about the BW-20 and is the answer not in the manual?
Questions and answers