Electrical Connection - Electrolux EUF29400 Instruction Book

Unscrew the hinge pin
Remove the door
5. Unscrew the door stopper screw
Remove the door stopper
5
6. Remove the two cover lids on the
roof
7. Unscrew the two screws on the
hinge
6
8. Remove the cover on the front
8
Reassembly in reverse order on the
opposite side.
Raise the cabinet and replace the
ventilation grille.
9. To transfer the handle.
Unscrew the screws. Fit the handle
onto the opposite side by turning it
one half circle. Press the supplied
plastic plugs into the holes to which
the handle was previously fitted.
Put the cabinet in position. Check that
the appliance is level. See the section
"Positioning the cabinet".

Electrical connection

Connect the cabinet to a grounded
7
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
9
20