Table of Contents
Advertisement
Treadmill Desk Troubleshooting
The LifeSpan Treadmill Desk is designed and manufactured to be reliable and easy to
use. However, if you have a problem, these troubleshooting steps may help you find
the cause.
Problem: The console is erratic or not lighting up.
Solution: Check to make sure the treadmill desk is properly plugged in. Turn the power
switch off and back on again and make sure the Safety Key is in place. Make sure
the connectors located in the front of the treadmill and under the desktop are fully
plugged in. If the problem persists contact LifeSpan customer service.
Problem: The treadmill motor seems strained or E1 comes up after several
minutes of use.
Solution: The silicone lubricant that is applied to the deck and belt is wearing down
and the belt needs to be lubricated with 100% silicone (non-aerosol). Available at www.
LifeSpanFitness.com.
Problem: The treadmill automatically pauses during a workout.
Solution: The treadmill is not picking up the step count. Go into the Personal Settings
section (page 29) to turn the Intelli-Guard feature off.
Problem: "UART" appears in the display.
Solution: Turn the treadmill desk power switch off. Unplug and re-plug the connections
made in Step C on page 13. Make sure the thumb screws are properly tightened. Turn
the treadmill desk power back on and check to see if it functions properly.
Problem: "dc-7" appears in the display.
Solution: Turn the treadmill desk power switch off. Unplug and re-plug the connections
made in Step C on page 13. Make sure the thumb screws are properly tightened. Turn
the treadmill desk power back on and check to see if it functions properly.
32
Advertisement
Table of Contents
