Akyga AK-EC-14 User Manual

AK-EC-14 - user manual
Short description of the product
The Akyga AK-EC-14 is used for charging an electric car via IEC 60309 3-PIN socket. It is compatible
with all 110-250 V / 6-32 A car models with IEC 62196-2 Type 2 plug and maximum charging power is
7.2 kW. A set of protectors OVP, OTP, OPP, SCP, OCP and the soft start technology provides safe and
stable operation of both power supply and charged vehicle.
The product is adapted to supply voltage of the electrical socket 110 - 250 V.
The power consumption of charging vehicle can not exceed the power supply nominal current.
The product is compatible with the applicable national and European requirements.
What is in the box?
- AK-EC-14 electric car charger
- Storage Bag
Symbols explanation:
There is a particular danger connected with service.
There is a risk of losing health or life (e.g. by electic shock).
Important tips and information.
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
The II protection class device. It provides protection against electric shock against direct and
indirect contact, and thanks to the additional isolation it is not necessary to connect the device
case with the protective earth conductor.
IP Rating
GREEN
Ecological Solutions
www.akyga.com
p. 1