Table of Contents
Advertisement
1
INSTALLATION METHOD
ACCESSORIES FROM BOX
Our chair is shipped in one box.
Setps:
Lift up the outer box
11
Lay down the footrest
Remove around
TURN ON POWER SUPPLY
2
1.Plug the power cord into three core socket with well grounding.
2.Turn on the power switch on the bottom of massage chair.
2
1
Before switching on the chair, please make sure there is no damage on the power wire and other
exposed wires.
CAUTION
Make sure the power switch is off before the chair is connected to electricity.
MOVE METHOD
3
There are moving rollers at the bottom of the chair.
Raise the back to the highest point.
Switch off and plug out the chair.
Lift the front part of the chair as showed in the figure(one person raise the front part via holding moving
holder, another person push the chair when holding the top of the chair), move the chair by the rollers.
Don' t move it when there is people in it.
Don' t use the armrest while moving the chair, only hold the moving holder in the back and front.
CAUTION
12
Advertisement
Table of Contents
